Think Calcium Think Himpol   |   50 Years of Manufacturing Excellence  |  Think Calcium Think Himpol   |   50 Years of Manufacturing Excellence  |  Think Calcium Think Himpol   |   50 Years of Manufacturing Excellence  |  Think Calcium Think Himpol   |   50 Years of Manufacturing Excellence  |  Think Calcium Think Himpol   |   50 Years of Manufacturing Excellence  |  Think Calcium Think Himpol   |   50 Years of Manufacturing Excellence  |  Think Calcium Think Himpol   |   50 Years of Manufacturing Excellence  |  Think Calcium Think Himpol   |   50 Years of Manufacturing Excellence

Our Blog

20 Window Sash Repairs Websites That Are Taking The Internet By Storm

Window Sash Repairs

Sashes for windows must be inspected regularly for signs of mold, mildew and other damage. By catching these problems early you will save money on repairs in the future.

The sash is an interior frame that is vertically moved upwards or downwards in windows that are open. This article will teach you how to perform several simple sash repair.

Weather Stripping

Wood window repair (try what he says) sashes provide the classic look to your home. When properly maintained, they can last for years. They may, however, become damaged or degraded with time due to exposure or normal wear. Sash repair experts can restore windows back to their original condition and keep them looking great much longer than replacement windows.

The first step in sash window repairs is addressing weather stripping, which is found on both the sash as well as the frame. If it’s loose or worn out, it can cause drafts, as well as other issues. To fix it, start by determining the brand of your window and the date of manufacture for the glass (etched in the corner of the glass or on the aluminum spacer between panes). Then, take the sash off and mark its height and width to find the appropriate weather stripping replacement to match.

Then, remove the sash from the holder and place it on a flat surface to allow you to access all four sides. If your sash has a double-hung, you’ll need to remove the weights as well as their accompanying ropes that should have fallen into the intended pocket in the jamb liner. Once you’ve taken the sash off using a utility knife, you can use it to cut away the weather stripping from the corners, and then remove it manually or using a putty blade.

After the sash has been cleared, you can replace the parting stops. They are long pieces of wood that divide the two sashes. Pam prefers to use standard 1/2-inch by 3/4-inch window trimming from the lumberyard. But, you can also substitute with a scrap piece of wood.

After removing the parting stops and trimming them to your desired length, apply a thin layer of glazing compound to the bottom of the sash. Smooth the compound with your putty tool, and let it dry at least a day. Once it’s fully cured and dried, apply a second coat of acrylic latex paint. This will protect the putty and give your sash a fresh appearance.

Sash Hardware

The hardware that holds window sashes is susceptible to wear and tear due to time and usage, and the result can be a window or door that won’t open or close easily. The good news is that fixing and replacing this hardware is generally relatively easy and affordable. If a sash becomes difficult to operate try spraying oil into the jamb channel, and then open it to see if it resolves the issue. If the issue continues it’s most likely the sash balance. It is necessary remove the window sash to access the hardware.

Window sashes need to be able to open and close with minimal effort. However, this could be difficult if weights are worn out or the sash-to-rail connecting rail isn’t coated. This issue could be caused by a variety of reasons, such as insufficient maintenance or a mismatched weight rating for a particular window sash.

If the hinge arms on windows begin to slide, this can cause the sash drag and eventually hit against the frame at the opposite corner (Photo 1). To fix this problem, first ensure that the sash fits squarely in the frame’s opening and then remove it from the window. If the sash is screwed to the hinge arm, you’ll need to loosen the hinge arm and replace it (Photo 2). Install the new sash (Photo 3).

Old windows, especially those in older homes, can be difficult to close and open because of sagging hinges and a general lack of energy efficiency. In many instances, a few easy repairs can transform these windows into smooth operation for the first time and save the homeowner money on energy costs.

It is important to have the tools needed before you begin. Begin by marking the position of the hinge channel on the frame using pencil (Photo 1). This will help you get the channel back on the correct position after you’ve finished. Then, remove the sash, and then remove the hardware including the beads that separate (Photo 2) and the cords or chains that secure it. A hot gun with nozzle shield and a medium setting will soften any hardened glue. Remove the old sash, and place it in a bag with a label.

Sash Weights

Sash weights are able to be replaced to improve the performance of your window sash and reduce the cost of energy. Sash weights are made of iron or lead cylinders that are encased inside a concealed cavity, and connected by ropes to the movable window sash. They are counterbalancers, allowing the upvc window repairs to be opened and closed without the use of electrical or mechanical devices. If they fail, sashweights tend to be left unnoticed or disabled by homeowners.

A weight in a sash that has fallen out of the cavity is difficult to get back, so you will want to locate a new one that fits correctly. You will also require a fresh piece of string, a length sashcord and a few sashpulleys for tying the weights you are replacing to the cord.

Mortise and Tenon joints are used to join older wood windows. The wood pegs holding the parts together can be removed using the use of a pin punch and hammer. The majority of these pegs have large diameters on one side and a smaller one on the other, which is why it is crucial to take out the small-diameter sides first. Sashes that were made later in the century made use of glue instead of pegs. They can be separated by cutting through the glue line using an instrument, and then tapping the mortised section loose using a mallet.

After the sash is removed, you can remove the stopper on the sash and get access to the weight pocket. Usually this is accomplished by drilling an opening at the bottom of each jamb. This hole is covered by a wooden access panel which can be removed so that you can observe the inner workings of the frame.

When the sash has been shut off and the access panel has been removed, you can remove the old weight and replace it. Make sure you weigh the sash prior to you do this, as the old weights may be different in size from what is needed. After the new weight is in place you can tie a string around it and then thread it through the pulley of the sash. Then, attach the string to the boxed frame. Leave a few inches of space at the end of the string to allow future adjustments.

Sash Cords

Most double-hung windows of the past have a cord or chain attached to the weights that helps keep the sashes level in the jamb. As time passes, these cords may break, making it difficult to raise the upvc window repair. A new sash cord can restore the ability to move the sash upwards and downwards and hold it in position when it is opened.

To replace sash cords the first step is to remove the access panels from the jambs. They are typically fixed or screwed in and will need to be removed or relocated. It may be possible to remove them with the hammer or window repair chisel however, it is best to lay out dust sheets before starting any work.

After the access panel has been removed, you can start working on the sash. Make the small parting beads (also called “tie rails”) out of their grooves using flat bar or chisel. It is important to be patient, as these are often stuck or nailed to the floor. If the sash is in place, remove the mortise and the tenon joints by using pin punch and hammer or screwdriver, then unhook the wood pegs on the components. The sash should move freely, however it may require some lubrication to feel less stiff.

With the sash in an open position, measure enough sash cord/chain to extend from the pulley at the top of the jamb to the sash slot in the bottom. Cut the chain or cord and attach it in Step 6 above. You can employ a hammer, screws or nails, but nails are less likely to cause damage.

It is best to keep the weights that came with the original counterbalance unless you’ve purchased a kit that will replace the old counterbalance. They’re not expensive and easy to install if you purchase them from salvage shops for architectural use. Depending on the size and shape of your window, you might need to install one or two sashweights in order to keep it open.

Related Tags
Social Share

Post Comment

24/7 We Are available

Make A Call & Get Appointment