Think Calcium Think Himpol   |   50 Years of Manufacturing Excellence  |  Think Calcium Think Himpol   |   50 Years of Manufacturing Excellence  |  Think Calcium Think Himpol   |   50 Years of Manufacturing Excellence  |  Think Calcium Think Himpol   |   50 Years of Manufacturing Excellence  |  Think Calcium Think Himpol   |   50 Years of Manufacturing Excellence  |  Think Calcium Think Himpol   |   50 Years of Manufacturing Excellence  |  Think Calcium Think Himpol   |   50 Years of Manufacturing Excellence  |  Think Calcium Think Himpol   |   50 Years of Manufacturing Excellence

Our Blog

Are Window Repairs The Same As Everyone Says?

UPVC Window Repairs

Upvc windows can cut heating costs and are energy efficient. As they get older, however, issues may arise that require to be fixed. This could include damaged handles, hinges, or locks.

Wooden window repairs can be fairly simple for DIY enthusiasts to tackle themselves. It can be cheaper than buying a brand new window.


Cracks and tears in uPVC windows can be a serious issue. Unrepaired windows can cause water intrusion and less effective barriers to cold weather, and even structural damage. It is essential to locate an experienced local builder or repair service that specializes in repairing uPVC frames and who has the expertise, experience, and tools required to deliver the most effective results. This will ensure that the crack is repaired swiftly before it gets worse and you don’t need to replace your window unit or glass.

Small cracks in glass can be fixed by using a variety of DIY solutions. Masking tape and super glue are among the most popular products that can keep cracked glass in place for a while. For deeper cracks, tape might need to be extended on both sides.

Another option is two-part epoxy that can be used to fix broken or cracked glass. The majority of hardware stores sell this product for about $10. Make sure your work area is properly prepared before mixing the epoxy. Also, ensure that you have all the equipment required for the job.

If your upper or lower sash isn’t lifting easily it’s because the cords on the sash weights have become damaged. Fortunately, this is a simple repair that can be made using an extension ladder and a flathead screwdriver. Replacing a rotted drip cap is a different repair that can be done at home. Drain caps that are free of rot are available at a majority of home centers and can be nailed or caulked into place with ease. Verify that the glass in a triple- or double-paned window is not broken. This is due to the gases that are filling the space between the panes are responsible for enhancing energy efficiency and should be retained and not released.

Water Leaks

If your uPVC window is leaking, this can cause damage to your home and lead to costly repairs. Water leaks may also cause structural damage to your home, as well as mold growth. It is crucial to address any problems caused by leaking windows immediately to prevent damage.

A damaged sealant around window frames is a frequent reason for leaks. Using silicone caulking can help bring the condition of the seal back to its normal condition and stop water leakage. Examine for gaps and upvc Window Repairs cracks around the window frame, as well as the brick or stone wall surrounding your windows.

Another reason for leaky windows is a blocked drainage hole or faulty flashing. Check that the drainage holes haven’t been blocked or blocked, especially after a heavy downpour. It’s also recommended to examine the flashing on the bottom of your window and ensure it’s sealed correctly.

Lastly, it’s important to ensure that your drip cap isn’t broken or damaged. A rotted drip cap or one that is missing will allow water from above to seep into your window and cause structural damage. Replacing a leaky drip cap isn’t a daunting task. It’s as easy as buying a new one, and nailing it in place.

It’s also a good idea to have your windows tested for water-tightness by a professional. They can use a tool to measure the water-tightness of your windows and make sure they are in compliance with the standards of the industry. If your windows fail the test, they will need to be replaced. This is a costly repair but it’s worth it for the comfort and safety of your family.


If your windows don’t shut properly it can cause a number of issues, including drafts, condensation and a rise in energy costs. It could also mean that the windows weren’t installed correctly or the sealant is worn out. Fortunately, there are some ways to correct the issue.

In order to repair your window properly it is essential to create a space that is well-lit. Begin by laying newspaper or an old blanket on the floor to shield it from any drips or splinters that might be coming from the window as you work.

It is also recommended to use a white cloth which has been submerged in a solution containing water and detergent. This will ensure that you don’t leave any stains of color on your windows. If you’re ready to work on your uPVC windows, start by marking the location where the hinge channel needs to be situated. Unscrew the channel, and then fill the screw holes in the frame using epoxy (for uPVC frames) or wood filler. Be sure to scrape the filled hole smooth before it sets.

Install the hinge channel once the holes have been filled. Make sure you center it on the window jamb, and drill the new screwholes about a quarter inch away from the original locations.

Then, measure the spindle that protrudes from the underside of your handle. You can request an replacement or take it to a local hardware store to find a suitable replacement. Finally, back out the setscrew that was on the shaft of the operator and smooth it so that the set screw is able to lock onto the shaft (photo). Now, your uPVC window should close smoothly.

Broken Hinges

If your uPVC window hinges have broken or aren’t functioning properly then you’ll find it difficult to open or close the window. This could cause an issue with security and stop your home from being cool or warm. It’s easy to get a new window hinge for your uPVC windows. It’s essential to ensure that you have the right hinge for your windows.

This is because the hinges have to be the same width to fit into the window frame. The most common hinge for uPVC windows are standard 18mm or UPVC 15mm hinges for windows. There are also hinges specifically designed for wooden frames. Choosing the correct window hinge for your windows can assist you in avoiding the typical issues that homeowners encounter with their windows, for example, not closing properly.

There are several reasons why the hinges on your windows have become stiff or loose. One of the most common causes is that the hinges aren’t sufficiently tightened. You can test this with a screwdriver. locate the friction screw at the end of the hinge, and then loosen it. You can then adjust it by turning it either way.

Call Preston Glass Fix if your UPVC window’s hinges don’t work properly. We can offer an immediate solution. Our technicians will examine the condition of your hinges for your windows and provide you with the best solution for your needs. We can replace window hinges or retension them, or even install new lock mechanisms to ensure your UPVC Windows are safe and secure.

The locks are not working properly

UPVC window locks and mechanism are an essential part of the security of your home, they make it very difficult to open the window without breaking. When a lock fails it could be frustrating, however it is a quick and easy fix and you do not need to replace the entire window.

It is often a minor issue that could have easily been avoided with regular maintenance. We suggest that you have your upvc window repairs near me window cleaned regularly as part of our yearly maintenance package in order to minimize the chance of any issues.

Modern uPVC windows are equipped with espagnolette locks. They work by pushing the nose of the handle on the block with a wedge, and then turning it to close the lock. They are effective in locking the window, but when they are not maintained properly, over time they may start to fail. We recommend applying WD-40 to them a couple of times a year.

If you notice your uPVC window isn’t opening or Upvc window repairs closing as smoothly as it did in the past, or if the lock doesn’t work properly, there could be a problem with locking gearboxes in the frame. It can be difficult to access as it requires the removal of the seals around the window frame and taking off the handle.

A locksmith who specializes in UPVC repair will be able to diagnose this fault quickly, and then replace the failed locking mechanism with a precise replacement. This simple and quick fix can save you hundreds of dollars by not the need to purchase new windows.

Related Tags
Social Share

Post Comment

24/7 We Are available

Make A Call & Get Appointment