Repairs to uPVC Windows

uPVC is a great option for modern homes. They are durable, long-lasting and easy to maintain. Unlike timber and aluminium, they are not susceptible to corrosion or rot.

Cleaning and lubricating regularly UPVC windows and doors is vital. This will save you from unnecessary repair costs and upvc window Repairs also improve the efficiency of energy.

1. Broken Glass

If the glass in your window is damaged, it can cause a huge amount of damage to your home, which can make it extremely dangerous and possibly fatal. It is crucial to take the time to make sure that you are doing everything you can to ensure that your windows are in good condition.

Single-pane windows are fairly simple to replace and will usually fit into the old frames very easily. However, if you have double-pane windows that are secured by internal beading, it’ll be more difficult to get rid of the old panes and put in new ones. In this situation, you will need to source some plastic spacers to help the new pane to fit perfectly into the frame of the window.

Wearing eye protection and thick gloves is essential if you plan to remove the glass yourself. You should also lay down a drop cloth before you begin working on the window panes, so that any shards of glass fall onto the fabric and not onto the floor and could be trampled.

It’s a great idea to seal the gap after the glass has been removed. This will keep water and drafts from entering your home until a professional comes out to fix the window. This also serves as a barrier to prevent any criminals from getting into your home. If the gap is large, you may think about a security door that has an integrated window, since it will provide the best of both worlds.

2. Sagging

uPVC is a durable, energy-efficient and affordable alternative to timber sash window. As time passes, they may develop a number of problems such as sliding. A sagging window can cause problems with light, draughts or even security. It is crucial to act immediately if you realize that your uPVC windows are sliding.

Repositioning the hinges could aid in fixing a window which is sliding. First, you’ll need to open the windows so you can reach the frame. Then, remove both the hinges on the top and bottom using a screwdriver, and then adjust them counter-clockwise or clockwise. Once you’ve adjusted the hinges, shut your window and verify the an appropriate fit. If you’re satisfied with the fit, tighten the screws until they stay in position.

If you can’t reposition the hinges you may require replacing the seal. Over time, rubber seals lose their elasticity and dry out and cause them to lose tightness. It is essential to replace your seal as quickly as you can in order to ensure that your uPVC window waterproof and draughtproof.

uPVC handles may also loosen. This is often caused by screws that have been removed over time, but it could be due to the mechanism of the handle getting worn out. It’s relatively simple to repair a loose uPVC handle. First, you’ll need to close the window repair and then perform an initial test to ensure that it fits. The corner joints of the sash need to be aligned with the casing joint. If it doesn’t, you can use a screwdriver to loosen the handle, and then turn the mechanism back into its original position.

3. Water Leaks

It is essential to act if you awake each day to discover mouldy walls and floors that are wet. Water leaks through windows can cause structural damage to your home and also hinder your ability to control the temperature inside your home. Most of the time, uPVC window leaks are caused by a damaged or missing sealant.

This is a relatively easy fix that can be done by any competent DIYer. Based on the severity of the problem the old caulking may need to be removed before a new layer of caulk can be put on. It is crucial to keep in mind that when it comes to uPVC window repairs, you should not be tempted to ‘over-caulk’ as this will only make the area more difficult to clean and can reduce the efficiency of your energy.

Make sure that the drainage holes have no debris in them and ensure that the sill pan is properly angled to allow the water to drain from the window. In more serious instances, you may need to think about replacing the window.

Other signs of long-term water leakage include decayed sills and the appearance of black spots of mold on the walls near the window. The is a fungus that thrives in damp conditions and can quickly spread across the home.

If the leakage is occurring between the double-glazed window, it is more likely the issue is more related to the seal, not the frame. A uPVC specialist can easily fix this issue by replacing the glass seal. This will restore the full insulation of your windows.

4. Faulty Hinges

Hinges may be to blame for the reason that your uPVC window is difficult to open or if it opens with an ease. They can be easily repaired by any DIYer who is skilled and can be completed in a matter of minutes.

Almost every household in the UK will have either top hung or side hung upvc window repairs windows that are hinged and, just like any mechanical component they can wear down over time. It is an easy process, but it’s easier to do when you have a person to help hold the frame in place.

Verify that the uPVC hinges open and close in the proper direction. Look for the arrows on each hinge to determine which way the window should be opened.

Window hinges that aren’t working properly could be the result of incorrectly opening the window in a certain way or by improper installation in the factory. Sending us photos via our website is often enough to resolve the problem. We are always happy to give advice.

It is also crucial to lubricate the hinges regularly. This can be accomplished by applying an oil that is light in nature to the hinges, we recommend using a solvent-free lubricant, such as the 3-in-one Multi-Purpose oil. Regular lubrication can allow the window to open and close more easily. It can also reduce the possibility of a window sticking and help prevent corrosion. Ideally, you should do this once a year. WD40 and other solvent-based lubricants are not recommended as they can cause damage to your uPVC windows.

5. Draughts

Draughts in windows made of upvc can be caused by a few various factors. The hinges can also become disaligned as a result of wear, causing an opening where the sash and frame meet. This can be easily fixed by giving them a good clean, but if they are beyond repair it may be necessary to have them re-aligned or replaced. Secondly the interlock, this is located on the hinge of the window, may also become misaligned, again it’s possible to give them a good clean, but in certain cases, it may be necessary to have these replaced.

The next most common reason for draughts are the window seals, these are prone to wear or damaged over time, and allow air to escape through these gaps. Replacement of these with high-quality weatherstripping is a good way to keep draughts at bay. Another alternative is to replace the upvc window with low-emissivity glass, this will help to regulate indoor temperatures and again will reduce draughts.

The last way to reduce drafts effectively is to use a draught-excluder. These are typically fabric tubes filled with a filler that can be hung over your window sill. They can help stop cold air from entering and keep your home warm and cosy!

Your windows made of upvc will keep providing excellent insulation and security in your home with a little regular maintenance and repairs. However, it is important to recognise that all windows have a lifespan and eventually, they will reach the point when it’s more cost-effective to replace them rather than fix them. So, if you’re experiencing problems with your upvc windows, it is always recommended to seek assistance from a professional as soon as you can.