Himpol

Think Calcium Think Himpol   |   50 Years of Manufacturing Excellence  |  Think Calcium Think Himpol   |   50 Years of Manufacturing Excellence  |  Think Calcium Think Himpol   |   50 Years of Manufacturing Excellence  |  Think Calcium Think Himpol   |   50 Years of Manufacturing Excellence  |  Think Calcium Think Himpol   |   50 Years of Manufacturing Excellence  |  Think Calcium Think Himpol   |   50 Years of Manufacturing Excellence  |  Think Calcium Think Himpol   |   50 Years of Manufacturing Excellence  |  Think Calcium Think Himpol   |   50 Years of Manufacturing Excellence

Our Blog

See What Autowatch Ghost Immobiliser Fitting Tricks The Celebs Are Using

Ghost Immobiliser Installation

Guard your precious possessions from car thieves by putting in a ghost immobiliser. Our TASSA-verified system protects against hacking, key cloning, and also vehicle immobiliser bypass.

The system is hidden inside the wiring loom of your vehicle making it totally invisible to anyone looking. It works by generating pin code push sequences that are activated by buttons already present on the steering wheel, door cards, and the centre console.

No circuit cuts

It’s not a surprise that people want to protect the car they’ve spent so much money to purchase. But, traditional security systems like alarms and wheel locks could easily be cut off or taken over by thieves. A ghost immobiliser is a highly-effective solution that operates silently and isn’t identified by modern thieves.

Ghost immobilisers or a hidden device is a device that connects with your vehicle’s data network CAN to disable the engine. It does this without radio frequencies or key fobs. It communicates with the ECU of your vehicle via buttons on the dash, steering wheel and door panels. This generates an individual pincode that is only known by you. The code can be changed at any point and can be up to 20 digits long, depending on what you prefer. It also comes with a safe emergency code that you can use in case you forget your PIN.

The ghost car immobiliser immobiliser could also be used to stop relay boxes from transferring the signal of your car’s key from inside your home, which would unlock the doors and then start the vehicle. It can even block new techniques of stealing your vehicle, such as OBD port hacking. The device is tiny, weatherproof and difficult to spot. It’s also difficult to tamper.

Another benefit of the ghost immobiliser is that it can be installed inside your car without permanent marks. This is ideal for those who are planning to resell their car in the near future. It’s also a lot faster and easier to install than a factory-fitted system.

The Autowatch Ghost, a revolutionary new-generation device, prevents contactless car thefts by connecting to a vehicle’s CAN network and using the buttons to generate an unique PIN code. It is a discreet device that can be installed with no wires cut and doesn’t require any additional key fobs. It is also connected to the original ECU of the vehicle, which prevents thieves from bypassing it with a new key. This system has been verified by TASSA and can be linked with an International Security Register. Owners will be able to rest easy knowing that their vehicles are secured from theft.

No scanning with RF

If you’ve put a lot of time and money into the customisation of your vehicle, you’ll want to safeguard it from theft. One of the best ways to accomplish this is to install an immobiliser. It will stop your engine from running until you enter a unique PIN. You can create a 20-digit PIN using the buttons on your dashboard and steering wheel. This will ensure that only you have the right to drive your vehicle. You can also set up a valet and service mode that will allow you temporarily to start your car without having to enter the PIN code. This will allow technicians to work on your vehicle, without being present. This is a fantastic feature for those looking to save time and make their life easier.

Ghost immobilisers, which are new generation device connects to the CAN data network of your vehicle and uses buttons on the dashboard and steering wheel to set a PIN number. It is designed to be stealthy and has no LED indicator or noise to make it obvious and can be installed anywhere on your vehicle without impacting the look of your prized possession.

This stealthy system has been approved by TASSA and could lower your insurance costs. It also comes with a tracking function, which can locate your vehicle even if it’s been stolen. This is a great feature for those who own a unique expensive vehicle that you’ve put many hours customizing.

The autowatch ghost immobiliser Fitting Ghost can be used together with an iPhone application to allow you to remotely start your vehicle in the event that you forget your PIN or are unable to get into the vehicle due to some reason. This feature is great if you need to take your kids to school or run errands, but don’t want to risk the safety of someone else driving your car. This feature is beneficial if you have to take your vehicle in for service or repair.

Another advantage of the Ghost is that it is unable to transmit or detect radio frequency signals, which makes it inaccessible to thieves using RF scanning or code technology to capture codes. It also shields your vehicle from key duplicates, ECU swapping and other typical methods of theft.

No key to cloning

Ghost immobilisers can be an excellent way to safeguard top-end vehicles and stop key cloning. They work by preventing your car from starting until an additional PIN code is entered alongside the regular key fob. This makes it more difficult for thieves to steal your vehicle, and can deter them from attempting. This is a good idea if your vehicle has been heavily customized or if it is an uncommon model.

These immobilisers are connected to the vehicle’s CAN network and are completely hidden, meaning that their presence isn’t evident. It is also impossible for a thief to locate the device using radio frequency scanning or code grabbing technology. This means that a criminal must spend a lot more time to steal your car.

To bypass the system, thieves need to know the unique pin code and the location of the Ghost. The pin code will be specific to you and may be changed as many times as you’d like. The pin code is easy to remember, but mathematically impossible for anyone else to work out. The engineer will also provide an emergency pin number in case you forget your pin.

The Ghost CAN Bus immobiliser is able to be installed in a matter of minutes on your vehicle. It is compatible with all vehicles and fully customisable to match the appearance of your vehicle. It is also extremely affordable and simple to use. The device can be transferred to a different vehicle, provided that it is compatible with the new vehicle.

The immobiliser on the CAN bus is compatible with many other security features. For example, it can detect the damage to your vehicle and warn the owner. It could also shut down the engine if it detects that the vehicle has been damaged. The system will safeguard your vehicle from hacking and key duplication. It also detects vibrations or contact with the vehicle. Additionally, it will notify the owner that the vehicle has been moved.

No OBD port hacking

Ghost is an immobiliser hidden in the module that is connected to your vehicle’s CAN data network which stops thieves from gaining access to your vehicle to disable the alarm, or deactivate the key fob and generate new keys. This technology is an improvement over the methods that were employed by thieves to steal vehicles in the past. The CAN data network also means that the system will not be affected by disconnecting or changing your battery.

The Autowatch Ghost is the first aftermarket CAN bus that is a non-detectable immobiliser that protects against key-cloning, hacking, and theft of replica cars. It is not equipped with LED indicators or key-fobs, instead leveraging the buttons on your steering wheel or autowatch ghost immobiliser fitting centre console, as well as the door panels to let you create a unique PIN sequence (up to 20 button presses) that needs to be entered first before you can drive your car away.

Modern thieves can use diagnostics to detect circuit breaks on your vehicle. They can bypass immobilisers which require a large amount of wiring or are integrated into the wiring. The ghost immobiliser 2 is weatherproof and does not require any additional wiring. It is not identified by diagnostic tools that are professional. It can be put in on vehicles equipped with anti-theft systems.

A Ghost immobiliser has another major benefit: your vehicle can only be started by someone who knows your PIN code and physically has access to your vehicle. This is a big advantage over traditional security systems which can be tampered with using simple cable manipulation, a screwdriver, or an universal remote controller.

You can easily reset your PIN if forget it using the emergency PIN override feature on mobile phones or computers. This is useful in the event that you have to start your car after it’s left in a garage, Autowatch Ghost Immobiliser Fitting or the valet parking service.

The Autowatch Ghost 2 has been approved for insurance by TASSA and is able to be installed by our authorised installers. It comes with an RFID fingerprint system that can identify specific parts, which allows for the return of stolen items if they are discovered. It can also be turned into a service mode’, which allows the engine to start when your car is in a garage, or with valet parking, but you will need to enter your PIN code once more to exit the car.

Related Tags
Social Share

Post Comment

24/7 We Are available

Make A Call & Get Appointment