Repairs to uPVC Windows

uPVC is a great option for modern homes. They are easy to maintain and durable, as well as long-lasting. They are not susceptible to decay or rust as aluminum and timber.

It is important to clean and oil UPVC doors and windows regularly. This will reduce repair costs and improve the efficiency of energy.

1. Broken Glass

The broken glass in your windows can cause serious damage to your home and even be fatal. It is important to take the time to make sure that you’re doing everything you can to ensure that your windows are in good repair.

For single pane windows, it can be relatively simple to replace them, and the new window will usually fit inside the frame of the previous one easily. If windows with double panes are held together by internal beading, it is harder to remove and replace the old panes. In this situation you’ll need locate some plastic spacers to aid the new pane in being able to fit perfectly into the window frame.

Wearing eye protection and heavy gloves is essential for anyone who plans to remove the glass yourself. It is also recommended to lay down a dropcloth prior to you begin working on the window panes, so that any shards fall on the fabric and not on the floor which could cause them to be trampled.

It’s a great idea to cover the gap with tape after the glass has been removed. This will prevent water and drafts from entering your home until a professional arrives to repair the window. It also acts as a barrier that will prevent any intruders from gaining entry to your home. If the gap is large, you may be interested in an alarm door that comes with an integrated window as it offers the best of both worlds.

2. Sagging

Upvc windows and doors are a low-cost energy efficient, durable and long-lasting alternative to timber windows with sash. As time passes, they may develop a variety of issues that include sagging. A window that isn’t properly aligned can cause problems with light, draughts or even security. It is crucial to act when you realize that your uPVC windows are sagging.

To repair a window that is sagging, you can try to reposition the hinges. First, you’ll need to unblock the windows to access the frame. You can then unscrew both the hinges at the top and bottom using a screwdriver and adjust the hinges clockwise or counter-clockwise. Once you’ve adjusted the hinges, close your window and verify the fitting. If you are happy with the fit of your window, you can tighten screws to secure them in the right position.

If you are unable to reposition the hinges, you might need to replace the seal. Over time, rubber seals lose their elasticity and become dry, which causes them to loosen. It is essential to replace your seal as soon as you can to keep your uPVC window waterproof and draughtproof.

UPVC handles can also loosen up. This is usually due to screws that have loosened over time, but it can also be due to the mechanism of the handle getting worn out. Luckily, it’s not difficult to fix a loose uPVC window handle yourself. The first step is to close the window and then perform an initial test fit. The corner joints of the sash should align with the casing joint. If it does not then you can use the screwdriver to loosen the handle. Then turn the mechanism into position.

3. Water Leaks

If you’re waking up to damp floors and mouldy walls each time it rains it is important that you take action. Water leaks through windows can cause structural damage to your home, and affect your ability to regulate the temperature of your home. Most of the time, upvc window repair window leaks are caused by damaged or missing sealant.

This is a fairly simple fix that can be completed by any DIY expert. Based on the severity of the issue the caulking that was used up may need to be removed before a fresh layer can be put on. It is essential to remember that when it comes to uPVC window repairs, do not be tempted to apply too much caulk’ as this will only make the area more difficult to clean and decrease the efficiency of your energy usage.

Make sure that the drainage holes do not have debris in them and ensure that the sill pan has been properly angled to allow the water to drain from the window. In more serious situations, you might need to consider replacing the window.

Mold spots and rotten sills are another sign of water leakage. This is a fungus that thrives in damp conditions and can quickly spread across the house.

It is also important to note that if the leak originates from the glass in your double glazed windows it may be more likely to be an issue with the glass seal rather than the frame or sliding. Again this can easily be corrected by a upvc window repair (writes in the official lasemd.co.kr blog) window specialist who will replace the glass seal and restore the full insulation properties of your windows.

4. Faulty Hinges

Hinges could be at fault when your uPVC window is difficult to open or it opens in a breeze. Anyone with the skills to fix them can replace these in a matter of minutes.

Like all mechanical parts, hinges can wear out over time. The process of replacing a hinge on a window is essentially a simple process, but it’s easier if you have someone to assist in holding the frame in place.

Verify that the uPVC hinges are closed and open in the proper direction. You can check this by looking for the arrow on each hinge, this indicates which way the window should be opened.

Faulty window hinges could be the result of incorrectly opening the window a certain way or due to poor installation at the factory. This issue can be fixed by sending us a photograph through our website and we will be happy to give you suggestions.

Regularly lubricating the hinges is also necessary. Applying a light engineering lubricant to the hinges is a great method to accomplish this. We suggest using an oil that does not contain solvents, like 3-in-1 Multi-Purpose oil. Regular lubrication can allow the window to operate and close more smoothly. It can also reduce the risk of a window sticking and prevent corrosion. Ideally, Upvc Window Repair you should do this once a year. WD40 or other solvent-based lubricants should not be used since they could damage your uPVC windows.

5. Draughts

Draughts in windows made of upvc can be caused by a few different factors. The hinges may also become unbalanced due to wear, creating a gap where the sash meets frame. If they are beyond repair, it could be required to realign them. The interlock may also become misaligned. It is located on the hinge’s side, and might require to be cleaned. In certain instances it might be necessary to replace these.

The next most common cause of draughts is the window seals, these are susceptible to being worn out or damaged over time, and will allow air to escape through these gaps. Replacing these with high-quality weatherstripping can help prevent draughts. Replace the windows made of Upvc with low-emissivity lenses. This will help to regulate indoor temperatures, and reduce the risk of draughts.

One of the most effective ways to reduce drafts is to use an draught excluder. These are typically fabric tubes which are filled with a kind of filler. They can be put on the top of your windowsill. These will help to stop cold air from entering and keep your home warm and cozy!

With a little maintenance and repair, your upvc windows will provide excellent insulation and security for your home. It is crucial to recognize that all windows have a lifespan and there may come a point where it is more cost-effective to replace them rather than fix them. If you have any problems with your Upvc window it is recommended to speak with an expert as soon as possible.